Vapour Logo

Are you over 18?

Free UK delivery - No minimum spend | TPD COMPLIANT - TPD REGISTRATION NUMBER: 00198
TPD Compliant

This item is currently out of stock

If you would like to be reminded when this item is back in stock please enter your email address below.

Innokin Pebble Starter Kit

Availability: Out of Stock




Innokin Pebble Starter Kit

The Innokin Pebble Starter Kit features the small 50 Watt Pebble Mod paired with a TPD compliant 2ml Innokin Slipstream Tank.

The Pebble Mod is matchbox sized with an integrated 1300mAh battery and basic variable wattage controls. The Slipstream tank has a protective shield making this an ideal pocket sized sub ohm device. The TPD compliant 2ml Slipstream tank is leak-free with fully a adjustable airflow. One pre-installed 0.8 Ohm coil and a spare 0.5 Ohm coil for extra cloud is included.

White and Gold mods are supplied with a Stainless Steel Slipstream tank and other Pebble colours are supplied with a Black tank.

NOTE: This kit produces a fantastic amount of Vapour, therefore you should lower your normal dosage of nicotine by half to get the same result. It is a sub ohm device and should be used with higher VG liquids. At least 50/50 blend VG liquid or above for optimum performance such as our Vape Mixology Eliquid. Using high PG liquid may cause tank leakage.


  • Pebble 50 Watt Mod:
  • Size: 55mm x 35mm x 22mm
  • 510 threaded connector
  • Push button with LED battery level light
  • Internal 1300mAh Battery
  • Variable power: 6 to 50 Watts
  • Max current output: 15 Amps
  • Max voltage output: 7.5 Volts
  • Atomizer resistance range: 0.2 to 3.5 Ohms
  • OLED screen display
  • USB charge port
  • Comes with mini/standard USB charge cable
  • Vape while charging
  • Three click on/off safety switching
  • 15 sec vape cut-off feature
  • Built-in low voltage, short circuit & overheating protection
  • Available in Gold, Coffee, Dark Blue, Black & White.
  • Innokin Slipstream Tank Features:
  • 2ml Capacity
  • Protected Pyrex glass tube with Stainless steel
  • 510 thread
  • Wide bore drip-tip (with spare)
  • Adjustable top airflow ring with 3 slots
  • Push-and-turn child-lock
  • Comes fitted with a 0.8 Ohm kanthal atomizer coil (20 to 35W)
  • Spare 0.5 Ohm stainless steel coil included (20 to 35W)
  • Spare tank seals included
  • Leak-free tank design
  • TPD compliant

What's Included

  • 1 x Innokin Pebble 50 Watt Mod
  • 1 x Innokin Slipstream 2ml Tank
  • 1 x Slipstream 0.8 Ohm Atomizer Coil (Fitted)
  • 1 x Slipstream 0.5 Ohm Atomizer Coil (Spare)
  • 1 x Pack of Spare O Rings
  • 1 x USB Battery Charging Cable
  • 1 x Pebble User Manual

Tank Capacity

  • 2ml


  • 1300 mAh


  • 0.8 ohm
  • 0.5 ohm

60 Day No Quibble Returns

On Vapour's own brand products

Free UK Delivery

No minimum spend


Place Order before 4.30pm Monday - Thursday *Pending connections

Product Review

See what our customers have to say about Innokin Pebble Starter Kit

This item currently has no reviews.